How to Pick Your First 3D Printer?
05/04/2023 00:00 Jack_chen 1805

3D printing, as an innovative technology, has the reputation of "Everything Can Be Printed", and it is impacting our life. 3D printing, which is usually considered as high technology, is not so difficult as long as you find a suitable 3D printer. Therefore, here come the instructions for novices about how to use a 3D printer.

 

 • Easy Assembly

 

When purchasing a 3D printer, first of all, we should pay attention to its assembly. 3D printers can be assembled in different ways, such as DIY assembly, modular assembly, and the fully-enclosed series is even free from assembly. 3D printers of modularized structure or fully-enclosed structure are highly recommended for novices, for they vastly reduce the difficulty of machine assembly. 3D printers of modularized structure or fully-enclosed structure are highly recommended for novices, for they vastly reduce the difficulty of machine assembly. Creality Ender-3 S1 is a good choice. With 96% pre-assembled, the 3D printer can be assembled within 6 steps, making it very easy to handle and enable users to print without too much preparation work. It’s indeed a big surprise. Owners of Creality Sermoon V1 can enjoy out-of-box printing with no need to assemble or conduct leveling. Users can start their 3D printing journey as quickly as possible.

 

SOVOL 3D printer is modular assembly, it just need to assemble the modular together, it is very easy even for beginners.

 

   • Easy Leveling

 

Leveling is a key step for printing good-looking models. SOVOL 3D printers greatly reduce the leveling threshold. For example, SOVOL SV06 Plus adopts the full intelligent leveling-free technology, which relies on the pressure strain gauge to ensure a highly accurate horizontal position, greatly simplifying the leveling. SOVOL SV06 Plus 25-point intelligent leveling, can automatically compensate for the heat bed’s unevenness. The whole leveling system is much easier to operate. 

 

 

     • Intelligent Controls

 

SOVOL SV06 Plus uses 4.3 inches touch screen, the unique UI and sensitive response give you better using experience.

 

 

     • Intelligent Controls

 

SOVOL SV06 Plus uses 32 bit silent board, with TMC2209, makes the printer work stably and silently.

 

 

3D Printers Filaments Accessories & Parts News
recommend
No results could be found.